6881038B80.book Page 20 Thursday, August 30, 2001 5:33 PM
Editing Scan List
Scan List Setting is changed by pressing the \ button three times.
•
The flashing channel will appear on the display with a solid
code section.
•
Press [ or ] button to increase or decrease the channel.
•
Pressing the J s button toggles between the channel number and Scan List
setting.
•
The scroll buttons, [ or ] will change the Scan List to include/
that particular channel.
•
Once you have seklected your Scan List options, press M to exit.
Setting the Battery Type*
This feature allows the battery meter to recognize and properly
display the power remaining of single cell batteries.
Press \ until d displays. Either A (Alkaline) or n (NiCad,
NiMH, Li-Ion rechargeable AA cells) is flashing.
•
Press [ or ] until your choice of A or n displays.
Note: *This menu will not appear if the NiMH Battery is in use.
End-of-Transmission Tone
When you turn this feature On, your two-way radio transmits a tone when you finish
X
transmitting. It's like saying "Roger" or "Over."
20
Y
or
n
in the
Y
or exclude/
n
A