To Set the Call Tone
With the radio on, press
Current Call Tone setting
Roger Beep/Talk Confirmation Tone
When you turn on this feature, your two-way radio transmits a unique tone when you
finish transmitting. It's like saying "Roger" or "Over" and lets others know you're
To enable Roger Beep/Talk Confirmation Tone, press and hold
your radio On. Now, when you release the
friends know you're finished talking and
To disable the Talk Confirmation Tone feature, turn your radio Off and then back
On while pressing and holding
To Use Audio Accessories
1. Make sure radio is Off. Open cover and plug accessory connector into jack.
2. Turn radio On and lower volume before placing accessory on head or in ear.
4. To transmit, press
5. To receive, release
, will begin to flash.
to change and hear Call Tone while flashing.
to set new Call Tone.
and speak into accessory microphone (if any).
appears in the upper right portion of
button, your set tone lets your
will appear on the display.
to adjust volume for comfort level.
as you turn