Alerts
Call Tone
The Call Tone obtains others' attention before you start talking. Press
using the same Channel with Code
Roger Beep/Talk Confirmation Tone
When you turn on this feature, your two-way radio transmits a unique tone when you
finish transmitting. It's like saying "Roger" or "Over" and lets others know you're
finished talking.
•
To enable Roger Beep/Talk Confirmation Tone, press and hold
your radio On. Now, when you release the
know you're finished talking.
•
To disable the Talk Confirmation Tone feature, turn your radio Off and then back
On while pressing and holding
Display Indicators
•
When your T4300 is waiting to receive a message, segments around the edge of
the display will slowly rotate clockwise.
•
When you are receiving a call or the channel is busy, a solid ring around the edge
of the display will blink.
•
When you are transmitting, a solid ring will appear continuously around the edge
of the display.
14
, will hear your Call Tone.
0
button, a Tone lets your friends
M
.
]
and users
^
as you turn
]