Connecting The Scanner To Your Computer Network - Olivetti d-Copia 1800MF Setup Manual

Scan system
Hide thumbs Also See for d-Copia 1800MF:
Table of Contents

Advertisement

Set-up

Connecting the scanner to your computer network

1
Turn the main switch located on the right side of the
scanner OFF.
Caution
ALWAYS turn the main switch to the scanner OFF BEFORE connecting the network cable.
2
Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located at the back side
of the right side of the scanner.
Important!
NEVER attempt to remove the Scanner Interface Card.
3
Turn the main switch to the scanner back ON ( | ).
2-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-copia 2200mf

Table of Contents