Welcome To The World Of Cyrus; Preparations For Installation; Speaker Detection - Cyrus Stereo 200 User Instructions

Cyrus Stereo 200

WElCOME TO ThE WORld Of CyRUS!

Congratulations on your choice of Cyrus Hi-fi products. Our
state-of-the-art design technology and outstanding quality
of manufacture has won countless awards around the
world. We are confident that you will derive great pleasure
from owning a product from one of the most recognised and
respected manufacturers of hi-fi equipment.
Now is a good time to register your new Cyrus product.
Registration takes only a few minutes, brings the added
benefit of a full two year factory warranty and adds you to
our mailing list for future product updates and upgrades.
To register, visit www.cyrusaudio.com and click the 'Login/
Register' link.
Please read these instructions carefully before commencing
installation. They provide full guidance to help you install
your amplifier safely and correctly.

Preparations for Installation

Before installing the Stereo 200 check that the following
items are included in the accessory box.
• Power Cable
• 4 loudspeaker plugs
• 2 MC-BUS cables
• ferrite clamp
After removing these items, please retain the packaging.
Install the amplifier in a well ventilated location away from
sources of high temperature, dust or humidity. Never stand
the amplifier under another unit or on any surface likely to
hamper its cooling or ventilation.

Speaker detection

The Stereo 200 automatically measures the impedance of
your speakers and adjusts its performance accordingly. The
process takes a few seconds and only takes place on the first
occasion that the amplifier is switched on after connection
to the mains.
NOTE: A faint noise may be heard through the speakers
during optimisation. This is normal.
Once the speakers have been measured, the results are
stored until mains power is next disconnected.
To ensure that this speaker optimisation runs correctly,
follow these guidelines -
• Make all connections, including speakers, to the amplifier
before connecting mains power.
• Turn the system volume control to minimum when
speaker optimisation is running.
• If you change your speakers, disconnect the amplifier
from mains power and re-connect it once the new
speakers are connected.
NOTE: The amplifier will not be damaged if you switch on
before connecting the speakers, but performance may be
compromised.
4
User Instructions