Use The Panic Button In An Emergency; What Happens When A Sensor Is Triggered? - SimpliSafe Starter Package Owner's Manual

C. Use the Panic Button in an emergency
At any time (whether or not the alarm is on) just press a
panic button for 1 full second to immediately sound the
alarm and notify the Emergency Dispatch Service.
Tip: Your Keychain Remote is similar to a car alarm
remote – it works within about 50 feet of the Base
Station. You can use the Panic Button on your Keychain
Remote while you are near or in your apartment, but it
will not function while you are in a different location.

What happens when a sensor is triggered?

• When your alarm is on and an Entry Sensor or Motion Sensor is triggered, the Keypad
will start beeping and prompt you for your PIN. You have 30 seconds to turn the
alarm off – this time is called the "entry delay."
• If the alarm is not turned off within the 30 second entry delay, SimpliSafe will sound an
85 decibel siren for four minutes and send an alert signal to our Emergency Dispatch
Center. You must activate your service in Step 2 for this service to function.
• Upon receiving the signal, the Dispatch Center will attempt to contact you.
• If it was a false alarm and you provide your previously chosen "safe word," no
authorities will be dispatched.
• If it is a true emergency or if they are unable to reach you, they will immediately
dispatch the police to your location.
Tip: If you accidentally set off your alarm, enter your PIN to turn off the siren. You can call
SimpliSafe at 1-888-95-SIMPLI (957-4675) to notify us of the false alarm or wait for the call
from our Dispatch Center. Be sure to answer the phone and have your "safe word" ready
to verify your identity.
Congratulations! Setup is complete and you can
start using your SimpliSafe system now. Feel free
to read on for more information about your System.
Please remember to test your system regularly.
visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
9