How To Navigate The Keypad Menu System; Change Your Pin; Test Your System - SimpliSafe Starter Package Owner's Manual

How to navigate the Keypad menu system

menu
• Press to begin.
cancel
• Use and
off
options, as indicated by the arrow icons.
• Press to make a selection or confirm
away
an entry, as indicated by the "enter" icon.
menu
• Press to cancel a selection or exit
cancel
the menu.
Keypad menu options:
1) Change PIN
2) Dialing prefix
3) Add component
4) Remove component
5) Test
6) Exit menu
B. Change your PIN
By default, your PIN has been set to 1234. Change this to a new 4 digit number:
menu
• Press on the Keypad to enter the menu system.
cancel
• Select option "1) Change PIN" on the Keypad Menu by pressing
• Type a 4 digit PIN and press
• Confirm your new PIN by typing it again and pressing
C. Test your system
We recommend you test your system regularly and after making any changes.
• Scroll to and select option "5) Test" on the Keypad Menu.
• Test sensors by opening doors and windows, pressing panic
buttons, and walking past Motion Sensors. After triggering a
sensor you should hear a confirmation from the Base Station.
• Press to exit test mode. Any errors will be
off
announced by the Base Station.
You must press TEST on the bottom of a
Motion Sensor for it to participate in a test.
visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
to scroll through
home
away
(enter).
1) Change PIN
enter
(enter).
away
(enter).
away
7