3. Stay safe
Modes
Your alarm system has 3 modes: Away,
Home and Off. Turn your alarm on by
putting it in Away or Home mode. Turn
your alarm off by putting it in Off mode.
A. Turn your alarm ON
Away Mode
Use this mode when you are leaving.
All Entry Sensors, Panic Buttons and
Motion Sensors will be active.
•
Close all doors and windows.
•
Press
on your Keychain Remote
away
or Keypad.
•
You have 60 seconds to exit before
the alarm is active.
Tip: To cancel during the exit delay,
simply press
B. Turn your alarm OFF
Use the same method to turn off your alarm, whether it is in the home or away mode.
•
Press
on your Keychain Remote OR
off
•
Press
, followed by your 4 digit PIN, on the Keypad.
off
If you make a mistake entering your PIN, press
If a sensor is triggered, there will be a 30 second entry delay before the alarm siren
sounds and the Emergency Dispatch Service is notified.
Tip: You can adjust advanced settings like the entry and exit delays by using the
SimpliSafe Easy Setup Wizard, described on the cover of this manual.
8
visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
.
off
Mode icons
off
Mode buttons
Home Mode
Use this mode when you are staying
home. All Entry Sensors and Panic
Buttons will be active, but the Motion
Sensors will not be active.
•
Close all doors and windows.
•
Press
on your Keypad.
home
•
Your Entry Sensors and Panic Buttons
will be active immediately. Motion
Sensors will not be active – you can
move freely around your home.
delete
to back up or
away
home
to start over.
off
Need help?
Do you have a question about the Starter Package and is the answer not in the manual?