Sanyo SAP-KCRV243GJH Technical & Service Manual page 57

As shown in the figure below, the automatic selection of the operating modes is determined
by the indoor temperature and outside air temperature.
When multiple indoor units are used and units in other rooms are already operating, they will be set to
the same type of operation as the operating indoor units.
The temperature, airflow direction and fan speed are set automatically but the airflow direction and
fan speed can be changed to suit your individual preference. It will take a few seconds for the fan speed
to be switched.
2. Manual Operation
NOTE
Indoor temperature
Approx.
15*
Approx.
22*
Approx.
20*
Approx.
18*
Heating operation
AIR CONDITIONER
HIGH
POWER
1HR.
ON OFF
SET CANCEL
Check that the circuit breaker on the power panel is turned on and that the operation
selector of the indoor unit is in the ON position.
Approx. Approx.
22* 27*
Cooling
operation
Drying operation
PM
ON . I/OFF . O
TEMP.
ECONOMY MODE
FLAP FAN SPEED
54
Temperature setting
(standard)
27*
20* to 26*
24*
STEP 2
STEP 3
STEP 1
STEP 4
STEP 5