Sanyo SAP-KCRV243GJH Technical & Service Manual page 52

Remote Control Unit (Continued)
HIGH POWER button
1 HR. TIMER button
OFF TIME setting button
ON TIME setting button
Advance button
CANCEL button
NOTE
HIGH POWER button
ON / OFF operation button
1 HR.TIMER button
(1-HOUR OFF TIMER)
Temperature setting
buttons (TEMP.)
Sensor
Display
Return button
SET button
CLOCK button
ACL button
The illustration above pictures the remote control unit after the cover has been lowered
and removed.
Transmitter When you press the buttons on the remote control unit, the
display to transmit the setting changes to the receiver in the air conditioner.
Sensor A temperature sensor inside the remote control unit senses the room temperature.
Display Information on the operating conditions is displayed while the remote control unit is
switched on. If the unit is turned off, only the mode that was set previously is still
displayed.
: When you press this button, the current operation mode is set to the HIGH
POWER mode, and the unit is operated in this mode for 15 minutes.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is operating or
1HR.
stopping, the unit operates for one hour and then shuts down.
Press the
Press the
For details, see Automatic operation and Manual operation.
AIR CONDITIONER
A
NORMAL
1HR. AM
PM
A A
HIGH
ON . I/OFF . O
POWER
1HR.
TEMP.
ECONOMY MODE
ON OFF
FLAP FAN SPEED
SET CANCEL
A/C
SENSOR
CLOCK
BATTERIES
**** ****
A
button to increase the set temperature.
button to reduce the set temperature.
49
Transmitter
(Cover closed)
ON/OFF operation button
Temperature setting buttons (TEMP.)
ECONOMY button
MODE selector button
FAN SPEED selector button
FLAP button
A/C SENSOR button
ADDRESS switch
Battery compartment (Pull off the
cover to expose the batteries.)
Model No.: RCS-3MVHPS4E
AIR CONDITIONER
A
NORMAL
1HR.
AM
PM
A A
HIGH
ON . I/OFF . O
POWER
1HR.
TEMP.
mark appers in the