Control Panel Functions; Factory Reset - Sagitter HYP006WW User Manual

Control Panel Functions

BUTTON FUNCTION
MODE Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected
ENTER
value in to the selected function
Navigates upwards through the menu list and increases the numeric
UP
value when in a function
Navigates downwards through the menu list and decreases the numeric
DOWN
value when in a function
Operating instructions
1 Enable password lock
Ü
ON enable lock
Enable the password lock, control panel in the boot or go into standby automatically
take effect, this time to operate lamps need to enter your password. { MODE UP
MODE DOWN MODE UP MODE DOWN }Ü {ENTER}

2 Factory reset

Ü
Note: The password is permanently set as {UP UP DOWN DOWN}
Then press ENTER button
Ü ON / OFF Ü {ENTER}
OFF disable lock
Ü {UP UP DOWN DOWN}Ü {ENTER}
9