Master/Slave Control Mode - Sagitter HYP006WW User Manual

Select 07channel on fixture's control panel (Please refer to DMX512 Channels
Selection). The figure above shows a simple DMX layout which has used three
units at each DMX address. The three units have different ID addresses. In
the DMX address: 001, the user can control the first three lights
simultaneously. When using channel 07 select the channel number is 020-029
3 and ID Address=02, the controller can control the second light individually.
When using channel 07 select the channel number is 000-010 and ID
Address=00, all the lights are in common use at the same DMX address.

Master/Slave Control Mode

1 Setting master machine
Acc
ess control panel function by pressing MODE until is displayed.
Press ENTER, select 01-03 by pressing UP/DOWN buttons.
Press ENTER.
2 Setting slave machine
Access contro l panel function by pressing MODE until is displayed.
Press ENTER, press UP/DOWN buttons until the is displayed.
Press MODE return to MENU
14