Table of Contents
Advertisement
MASTER DIMMER
Channels 1 controls the intensity of the currently projected color
When the slider is at the highest position (255), then the intensity of the output is at
themaximum.
COOL WHITE AND WARM WHITE SELECTION
Channels 2, 3 control the intensity ratio of each of the Cool & Warm White LEDs.
Channels 1&2 &3 can be combined together to create multiple white CT color combinations
WHITE CT MACROS
Channel 4 selects the required White CT Macro.
Channel 4 has priority over Channels 2, through 4.
ID Address Instructions
1.Setting ID address
1 Access control panel function by pressing MODE until
2
Press ENTER, increase or reduce ID values by pressing UP/DOWN between 01
and 66.
3 Press MODE to exit.
2. Enable or disable ID
Ü
1
Access control panel function by pressing MODE until
2
Press ENTER, select by pressing UP/DOWN until is
3
Press ENTER, turn on or off ID addressing by pressing UP/DOWN buttons.
4
Press MODE to exit.
For every DMX512 address the user can set 66 separate ID addresses. ID
addressing is a secondary function in DMX512 mode. In DMX512 Controller Mode,
the user can simultaneously control the individual DMX address of all lights, and
can control the lights which have separate ID address in independent DMX512.
Ü ON-OFF
13
is displayed.
is displayed.
displayed.
Advertisement
Table of Contents
