Midas PRO X Quick Start Manual page 20

20 PRO X
Input channel navigation controls on the PRO X.
7
6
9
5
Item Element(s)
Quick access button —
1
channel strip
Quick access button — input
2
fast strip
LCD select button — input
3
fast strip
LCD select button — VCA/
4
POP group
Channel select keys and
5
button
6 ALIGN button
7 scroll by 4 / 12 buttons
8 B button
9 scroll by 1 buttons
Mix bay channel strip
1
8
4
Description
Quickly selects the local processing area of the selected channel or channel pair, but doesn't aff ect channel selection.
Illuminates (blue) when active.
Quickly selects the local input channel and assigns the local processing area to the mix bay channel strip.
Illuminates (blue) when active.
Selects the local input channel. Has a backlit LCD display (with user-confi gurable backlight colour), which shows channel name etc.
When selected, the display changes to a 'negative' image.
Selects the VCA/POP group, unfolding the group members to the control surface. Has a backlit LCD display (with user-confi gurable
backlight colour), which shows group name. When selected, the display changes to a 'negative' image.
This button is also used for setting up the group (see To Assign Channels to a VCA/POP Group).
The INPUT button in the channel type section is used with the number keys in the lower channel select section to select a specifi c
channel number, assigning it to the control surface (see Fault Finding A Problem Channel).
Navigates the currently selected input channel to the local input bay (see To Navigate The Selected Input Channel Back To
The Control Surface").
These left and right scroll buttons scroll through the input channels 12 channels at a time on the left 12-channel bay, and 4 at a time
on the right 4-channel bay
Assigns the 4-channel input bay as area B, which then operates with the master bay channel strip.
These left and right scroll buttons scroll through the channels one at a time. Channel selection follows the scrolling.
Input fast
strip
2
3