Hardware Connections - Uniden GnVr 85XX series Owner's Manual

HarDWare connections

Follow the steps below to connect the GNVR and the camera(s).
1. Connect the camera to the 30m Ethernet cable and plug the cable into the
VIDEO IN port on the GNVR.
2. Connect the HDMI cable (supplied) to the HDMI port on the GNVR and to
the external display device (TV/PC) or the VGA cable (not supplied) to the
VGA port.
3. Connect the Mouse to one of the USB ports on the GNVR.
4. Connect the Ethernet cable to the RJ45 port on the GNVR and to your
modem/router (remote viewing).
5. Plug the GNVR's Power Cable jack into the DC IN port and the other end to
a power outlet.
External Display
HDMI Cable
Modem/Router
Ethernet Cable
External
Hard Disk
nVr
30m Ethernet Cable
Power Cable
(To Power Outlet)
Camera
Mouse
(To the USB
port in front)
13