Specifications - Mitsubishi Electric HC5 Service Manual

• Rated power supply : 100-240 V AC, 50/60 Hz
• Power consumption : 4.0A
• Display technology : 0.61 inch SXRD
• Pixels : 1,920x1,080= 2,073,600 pixels
• Projection lens : F=3.2-3.9, f=21.4-38.5 mm
• Light source lamp : 230 W
• Picture Size : 50-200 inch (16:9)
• PC compatibility : 1,920 x 1,080
• Video compatibility : NTSC / NTSC 4.43 / PAL (including PAL-M, N)
/ SECAM / PAL-60
Component Video(480i/p, 576i/p, 720p, 1080i/p)
• S-Video input : Luminance signal;
1.0 Vp-p 75Ω (negative sync)
Chroma signal;
0.286 Vp-p 75Ω (burst signal)

SPECIFICATIONS

TM
panel
•
•
- 3 -
• Video input : 1.0 Vp-p 75Ω(negative sync)
• Analog RGB input : RGB: 0.7 Vp-p 75Ω(negative sync)
YPbPr/YCbCr: Y-> 1.0 Vp-p (negative sync)
PbPr/CbCr-> 0.7 Vp-p
HD/CS: TTL level(positive or negative)
VD: TTL level(positive or negative)
• Digital input : HDMI interface (TMDS single link)
• Control connector : Serial terminal (RS-232C) (D-sub 9 pin)
• Outside dimensions : 482 x 215 x 530mm (width x height x depth)
• Weight : 14.5kg
• Operating temperature : 5°C - 35°C
Weight and dimensions shown are approximate.
Design and specifications are subject to change without
notice.