11. Removal of the Duct fan (Inlet)
1. Remove the Top cover ASSY according to "1. Removal
of the Top cover ASSY".
2. Remove the five screws (a) and Duct unit (Inlet) as
shown in Fig. 3-5.
3. Remove the six screws (b) and Duct cover (Inlet) as
shown in Fig. 3-5.
4. Disconnect the connector on the LFT PCB ASSY as
shown in Fig. 3-6.
5. Remove Duct fan (Inlet) as shown in Fig. 3-5.
LEAD DRESS
To remove the Duct cover (Inlet), release the clamper.
Duct fan (Inlet)
- 16 -
ax5
Duct unit (Inlet)
bx6
Duct cover (Inlet)
Fig.3-5