Lead Dress; Top View - Mitsubishi Electric HC5 Service Manual

LEAD DRESS

Note : The inner wires are clamped so that they do not come close to heat generating or high voltage parts. After
servicingroute all wires in their original position.
Note : On the lead connector, the connector name isn't indicated. When disconnecting the lead connector, place
labels (INDEX LABELs) bearing the reference markings (connector names) near the lead connectors and the
connectors on the board to prevent wrong disconnection. After re-connecting the lead connectors, remove
the labels (INDEX LABELs) . To disassemble the product, it is required to cut the BAND KMs that clamp the lead
connectors. Therefore, when re-assembling the product, prepare and use the specified BAND KMs. For the part
number of the BAND KM, refer to PARTS LIST.
For the reference markings of the lead connectors, see pages D23 to D26.
For the connector names of the fans and motors, see pages D35 to D48.

Top view

POWER PCB ASSY
MEMC SOCKET
SCALER SOCKE
- 21 -
LAMP POWER PCB ASSY
LFT PCB ASSY
SCALER PCB ASSY
MEMC PCB ASSY
Y-pro PCB ASSY
DDB PCB ASSY
HDMI PCB ASSY
I/O PCB ASSY