Flash/Call Waiting; Hold; Mute - AT&T CL2909 User Manual

Telephone operation
Telephone operation
LOWER

Flash/call waiting

If you subscribe to call waiting service with your
telephone service provider, you can answer a new
incoming call without losing your current call.
1. While on a call, press FLASH to connect to the
new call when you receive a call waiting signal.
2. Press FLASH again to return to the original call.
NOTEs:
Use FLASH to access other subscriber services,
•
as described by your telephone service provider.
• The telephone cannot display the information
if another telephone on the same line is in use.
Make sure all extensions are not in use.

Hold

LOWER
Press HOLD to put a call on hold.
•
To return to the call:
• Press HOLD again.
-OR-
Lift the handset.
-OR-
Press
-OR-
Pick up the call at another extension connected
to the same telephone line.

Mute

LOWER
Press MUTE to prevent the other party from
hearing you but you will still be able to hear the
other party. Press MUTE again to return to your
two-way conversation.
SPEAKER.
17 17