American Audio 14MXR User Manual And Reference Manual page 15

14MXR CONTROLS AND FUNCTIONS cont.
28. MAIN POWER SWITCH - This is the main power ON/OFF button. Before main power is
applied, be sure you have made all connections to the mixer. Also be sure your amplifier(s) is(are)
tuned off. Remember to avoid damaging pops to the speakers, the mixer is turned on first and
turned off last.
29. AC CONNECTION - This connector is used to supply main power to the unit via the included
detachable power cord. The power connection uses an I.E.C. type connector, use only the supplied,
polarized AC power cord. Use only a power cord that matches this type of connection. Be sure to
only connect this unit to a power outlet that matches the printed power label on the unit. Never use
a power cord when the ground prong has been removed or broken off. The ground prong is used to
reduce the risk of electrical shock in case of an electrical short. This cord is designed to fit in one
direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted
properly.
FUSE HOLDER – This housing stores the 10 amp GMA protective fuse. Always replace with the
exact same type fuse, unless otherwise instructed, by an authorized American Audio service tech-
®
nician. Replacing with any other type of fuse than that of the recommended fuse will void your unit
warranty.
American Audio - www.americanaudio.us - 14MXR Instruction Manual Page 15
© ®