G4 Board - Sony FWD-32LX1R Service Manual

1-4-3. G4 Board

Removal
1. Remove the cabinet assembly.
(Refer to Section 1-3-1.)
2. Remove the shield cover G and two arms.
(Refer to steps 2 and 3 of Section 1-4.)
3. Disconnect the seven harnesses from the connectors
(CN7200-CN7205, CN7700) on the G4 board.
4. Remove the six screws.
5. Remove the G4 board from the two locking card
spacers.
FWD-32LX1R
CN7201
CN7202
CN7200
CN7203
G4 board
Harnesses
BVST
3 x 6
Conductive cushion
Installation
6. Install the G4 board in the reverse order of steps 3 to 5.
7. Reassemble this unit in the reverse order of steps 1 and
2.
CN7204
CN7205
CN7700
G4 board
Harness
Locking card spacer
1-7