Table of Contents
Advertisement
13
WHEELS, TIRES
13.5
Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
–
Pull the rear wheel back and mount wheel spindle
adjuster
–
Mount nut
–
Push the rear wheel forward so that the chain adjusters are on the screws, and
tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and
right chain adjusters must be in the same position relative to the reference
marks
Nut, rear wheel spindle
B01606-11
Finishing work
–
Take the motorcycle off of the rear wheel stand. (
x
.
Info
Mount the left and right chain adjusters
and washer.
.
.
with the washer and chain
in the same position.
M14x1.5
90 Nm
(66.4 lbf ft)
p. 74)
106
Advertisement
Table of Contents
