KTM 2015 200 Duke Owner's Manual page 73

Table of Contents

Advertisement

9
SERVICE SCHEDULE
Check the valve clearance.
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and bellows for cracking, leaks, and correct routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Change the air filter. Clean the air filter box.
Check the screws and nuts for tightness.
Change the front brake fluid.
Change the rear brake fluid.
Check the headlight setting. (
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service record.
One-time interval
Periodic interval
x
p. 129)
x
x
x
x
p. 124)
x
x
x
x
Every 15,000 km (9,321 mi) or every 2 years
Every 7,500 km (4,660 mi) or annually
Once after 1,000 km (621.4 mi)
x
x
71

Advertisement

Table of Contents
loading

Table of Contents