D-Link Air Xpert DI-774 Manual page 14

Using the Configuration Menu
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)
computers by their MAC addresses from accessing the Internet. You can either
manually add a MAC address or select the MAC address from the list of clients that
are currently connected to the Broadband Router.
Filters-
select the filter you wish to use; in this case, MAC filters was
chosen.
MAC Filters- choose Disable MAC filters; allow MAC addresses listed be-
low; or deny MAC addresses listed below.
Name-
enter the name here.
MAC Address-
enter the MAC Address.
DHCP Client-
select a DHCP client from the pull-down list; click Clone to copy
that MAC Address
26
Using the Configuration Menu
Advanced > Filters > Domain Blocking
Domain Blocking is used to allow or deny LAN (Local Area Network) computers from
accessing specific domains on the Internet. Domain blocking will deny all requests to a
specific domain such as http and ftp. It can also allow computers to access specific
sites and deny all other sites.
Filters- select the filter you wish to use; in this case, Domain Blocking
was chosen.
Domain Blocking:
Disabled-
select Disabled to disable Domain Blocking
Allow-
allows users to access all domains except Blocked Domains
Deny- denies users access to all domains except
Permitted Domains
Permitted
Domains- enter the Permitted Domains in this field
Blocked Domains- enter the Blocked Domains in this field
27