Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for configuring
the DI-774 Tri-Mode Dualband Wireless Router. The DI-774 acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DI-774 Tri-Mode Dualband Wireless Router
CD-ROM (containing Manual and Warranty)
Ethernet (Straight Through) Cable
5V 3A DC Power Adapter
specifications subject to change without notice. DI-774. 03282003
1
DI-774
Tri-Mode Dualband
Wireless Router
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
Advertisement
Table of Contents
Related Manuals for D-Link DI-774
Summary of Contents for D-Link DI-774
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-774. 03282003... - Page 2 Connecting The DI-774 Wireless Router To Your Network First, connect the power adapter to the receptor at the back panel of the DI-774 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
-
Page 3: Restart Your Computer
Connecting Additional Computers To The DI-774 Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-774. M1 LED – a solid light indicates that the DI-774 is ready. -
Page 4: Using The Setup Wizard
When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin”... - Page 5 The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next...
- Page 6 The Setup Wizard (continued) Choose your time zone from the drop down list. Click Next Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. Click Next select, please contact your Internet Service Provider.
- Page 7 The Setup Wizard (continued) If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service.) Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.
- Page 8 The Setup Wizard (continued) If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Please be sure to remove any existing PPPoE client software installed on your computers. Enter in the username and password provided to you by your ISP.
- Page 9 The Setup Wizard (continued) If you wish to use encryption for your 802.11g network, the DI-774 is capable of three levels of wireless encryption - 64-bit, 128-bi, and 152-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless commu- nication.
- Page 10 The Setup Wizard (continued) If you wish to use encryption for your 802.11a network, the DI-774 is capable of three levels of wireless encryption - 64-bit, 128-bit, and 152-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless commu- nication.
-
Page 11: Test Internet Connection
Click Close Test Internet Connection. You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Ex- plorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status... - Page 12 Here’s how to configure the network adapter to obtain an IP address automatically for the DI-774 Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...
- Page 13 Apple Macintosh OS X: Go to the Apple Menu Click Network and Select System Preferences Select Built-in Ethernet in the show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear...
- Page 14 Notes...
- Page 15 Notes...
-
Page 16: Technical Support
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.