Symbols Used In Displays - AT&T System 25 User Manual

Display (Continued)
Pressing the
INSPECT
mode, where you can
specific buttons. See the entry entitled "Inspect" for more
details.
The button allows you to check the number
DIRECTORY
associated with someone in your system. For more information
about operation for this feature, see the entry for "Directory".

Symbols Used in Displays

Two groups of symbols provide specific information about
incoming calls. Symbols that may appear on the left side of the
Screen 1 display are as follow:
Display symbol
>
}
&
I
Q
F
T
button puts the display into the Inspect
check the information associated with
Meaning of the symbol
A redirected or coverage call has been
sent to the console.
A call is returning to the console from
an extension that is busy or does not
answer; or a call has been redirected
using the Third-Party Call Setup (for
Data) or Park feature.
The button has been pressed
START
while handling a call.
This is a Busy-to-Idle Reminder call.
call has been queued by
The
requesting the Callback feature.
The call has been forwarded to an
outside location.
The call being received is a transferred
call.
(Continued)
19