Overlay - eLine ELI-SIP2-NVR16 User Manual

Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.

Video/audio: You can enable or disable the video/audio. Please note, once you enable audio

function for one channel, system may enable audio function of the rest channels by default.
Copy：After you complete the setup, you can click Copy button to copy current setup to other

channel(s). You can see an interface is shown as in Figure 4-51. You can see current channel
number is grey. Please check the number to select the channel or you can check the box ALL.
Please click the OK button in Figure 4-51 and Figure 4-49 respectively to complete the setup. Please
note, once you check the All box, you set same encode setup for all channels. Audio/video enable
box, overlay button and the copy button is shield.
Please highlight icon

4.8.1.2 Overlay

Click overlay button, you can see an interface is shown in Figure 4-49.
Cover area: Here is for you to cover area section. You can drag you mouse to set proper section size.

In one channel video, system max supports 4 zones in one channel. You can set with Fn button or
direction buttons.
Preview/monitor: The cover area has two types. Preview and Monitor. Preview means the privacy

mask zone can not be viewed by user when system is in preview status. Monitor means the privacy
mask zone can not be view by the user when system is in monitor status.
Time display: You can select system displays time or not when you playback. Please click set button

and then drag the title to the corresponding position in the screen.
Channel display: You can select system displays channel number or not when you playback. Please

click set button and then drag the title to the corresponding position in the screen.
to select the corresponding function.
Figure 4-48
144