View And Set Https Port; Login; Event; Video Detect - eLine ELI-SIP2-NVR16 User Manual

Click Yes button, system pops up the following dialogue box, you can see the certificate download is
complete. See Figure 5-52.

5.8.2.16.3 View and set HTTPS port

From Setup->Network->Connection, you can see the following interface. See Figure 5-53.
You can see HTTPS default value is 443.

5.8.2.16.4 Login

Open the browser and then input https://xx.xx.xx.xx:port.
xx.xx.xx.xx: is your device IP or domain mane.
Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port
information here. You can input https://xx.xx.xx.xx to access.
Now you can see the login interface if your setup is right.

Event

5.8.3

5.8.3.1 Video detect

5.8.3.1.1 Motion Detect

After analysis video, system can generate a video loss alarm when the detected moving signal reached
the sensitivity you set here.
Figure 5-51
Figure 5-52
Figure 5-53
269