Gs1 Databar Expanded; Convert Gs1 Databar To Upc/Ean - Symbol DIGITAL DS6708 Product Reference Manual

13 - 66 Symbol DS6708 Digital Scanner Product Reference Guide

GS1 DataBar Expanded

Parameter # F0h 54h.
*
Enable GS1 DataBar Expanded

Convert GS1 DataBar to UPC/EAN

Parameter # F0h, 8Dh
This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. Enable this to strip the leading '010' from DataBar-14 and DataBar Limited symbols encoding a
single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros, this parameter strips the leading '0100' and
reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and country
code applies to converted bar codes. Note that neither the system character nor the check digit can be stripped.
Enable Convert GS1 DataBar to UPC/EAN
(01h)
(01h)
Disable GS1 DataBar Expanded
(00h)
*
Disable Convert GS1 DataBar to UPC/EAN
(00h)