Motorola CLS446 User Manual page 6

Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has
received a sharp blow, or has been dropped or damaged
in any way.
3. Never alter the AC cord or plug provided with the unit. If
the plug will not fit the AC outlet, have the proper outlet
installed by a qualified electrician. An improper condition
can result in a risk of electric shock.
4. To reduce the risk of damage to the cord or plug, pull the
plug rather than the cord when disconnecting the
charger from the AC outlet.
5. To reduce the risk of electric shock, unplug the charger
from the AC outlet before attempting any maintenance or
cleaning.
6. Use of an attachment not recommended or sold by
Motorola may result in a risk of fire, electric shock, or
personal injury.
7. Make sure the cord is located so it will not be stepped
on, tripped over, or subjected to damage or stress.
8. An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could
result in a risk of fire and/or electric shock. If an
extension cord must be used, make sure:
• That the pins on the plug of the extension cord are the
same number, size, and shape as those on the plug of the
6
charger.
• That the extension cord is properly wired and in good
electrical condition, and
• That the cord size is 18 AWG (1mm2) for lengths up to
100 feet (30 metres) and 16 AWG (1.3mm2) for lengths up
to 150 feet (45 metres).
9. The supply cord of this charger cannot be replaced. If
the cord is damaged please return to your place of
purchase.