Alarm Operation - Jensen JMC-180A User Manual

SETTING THE WAKE UP TIME
1. In Standby mode, press and hold the AL. SET button (#10) until the Hour & Minute digits in the LCD display
flash.
2. Press the HOUR button (#9) and MINUTE button (#8) repeatedly to set the correct wake up time.
3. Press the AL. SET button (#10) once to confirm the alarm time.
4. The alarm time will stop flashing. The alarm indicator ֠ will remain flashing.
5. Press the AL. SET button (#10) repeatedly to select the alarm type, CD Player, Radio or Alarm sound.
֠
( Alarm and CD icon on and flash for Wake to CD, Alarm
Radio and only Alarm
6. Press and hold the AL. SET button (#10) 2 seconds, the setting will be stored. The setting will also be stored
automatically after 5 seconds if no buttons are pressed.
WAKE TO RADIO
1. Press the STANDBY button (#5) to turn on the System. The LCD DISPLAY lights up.
2. Press the MODE button (#17) select Radio mode.
3. Tune to your desired station, and adjust the volume level that you wish to hear when the wake up time is
reached.
4. Press the STANDBY button (#5) to turn off the System. Repeat SETTING THE WAKE UP TIME step 1 to 4.
5. Press the AL. SET button (#10) repeatedly to select Wake to Radio and store.
6. Press the AL.ON/OFF Button once to turn on the alarm function. The ALARM INDICATOR
7. At the selected wake up time the Radio will turn on and will play about 60 minutes and then shut off
automatically.
8. To stop the radio before it shuts off, press STANDBY button (#5) once. The radio will stop but the alarm remains
set and will turn the radio on again at the same time on the following day.
9. If you do not want the alarm to turn the System on the following day, press the AL.ON/OFF Button (#7) again to
turn off the alarm function. The ALARM INDICATOR
WAKE TO CD
1. Press the STANDBY button (#5) to turn on the System. The LCD DISPLAY lights up.
2. Insert a CD you want to play when the wake up time is reached.
3. Press the MODE button (#17) repeatedly to select CD mode.
4. Adjust the volume level that you wish to hear when the wake up time is reached then press the STANDBY button
(#5) again to turn off the System.
5. Repeat SETTING THE WAKE UP TIME step 1 to 4.
6. Press AL. SET button (#10) repeatedly to select Wake to CD
7. Press the AL.ON/OFF Button once to turn on the alarm function. The ALARM INDICATOR
8. At the selected wake up time the Radio will turn on and will play about 60 minutes and then shut off
automatically.
9. To stop the CD before it shuts off, press STANDBY button (#5) once. The CD will stop but the alarm remains set
and will turn the CD on again at the same time on the following day.
10. If you do not want the alarm to turn the System on the following day, press the AL.ON/OFF Button (#7) Button
again to turn off the alarm function. The ALARM INDICATOR
WAKE TO ALARM
1. Repeat SETTING THE WAKE UP TIME step 1 to 4.
2. Press AL. SET button (#10) repeatedly to select Wake to ALARM.
3. At the selected wake up time the alarm will sound for 60 minutes and turn off automatically.
4. To stop the Alarm before it shuts off, press the STANDBY button (#5) once. The Alarm will stop but the alarm
remains set and will turn on again at the same time on the following day.
5. If you do not want the alarm to turn on the following day, press the AL.ON/OFF Button (#7) Button again to turn
off the alarm function. The ALARM INDICATOR

ALARM OPERATION

֠
on and flash for Wake to Alarm. )
֠
and FM or AM icon on and flash for Wake to
֠
will go off.
֠
goes off.
֠
will go off.
E-12
֠
will light up
֠
will light up.