Troubleshooting Guide - Jensen JMC-180A User Manual

Wall mountable cd system with digital am/fm stereo receiver
Table of Contents

Advertisement

If you experience difficulties in the use of this music system please check the following or call 1-800-777-5331 for
Customer Service and Support.
Symptom
Noise or sound
distorted on AM or
FM broadcast
AM or FM no sound
CD player will not play
CD skips while
playing
Intermittent sound
from CD player
Sound appears
distorted at high
volume levels
No Alarm Display

TROUBLESHOOTING GUIDE

Possible Cause
- Station not tuned properly for AM or FM.
- FM: FM Wire antenna is not extended.
- AM: The bar antenna is not positioned
correctly.
- Unit not in "RADIO" function mode.
- Volume set at minimum
- Unit not in CD function mode.
- CD is not loaded properly.
- If the CD is self-compiled, the media used
may not be compatible with the player.
- Disc is dirty or scratched.
- Dirty or defective disc.
- Dirty pick up lens.
- Player is subject to excessive shock or
vibration.
- Volume control is set to maximum.
- Alarm is not activated.
- Incorrect Alarm time.
SPECTRA GREEN NOTICE
At Spectra, environmental and social responsibility is a core value of our
business. We are dedicated to continuous implementation of responsible
initiatives with an aim to conserve and maintain the environment through
responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for
more information on Spectra's green initiatives or to find a recycler in your area.
- Retune the AM or FM broadcast station.
- FM: Extend the FM Wire antenna
- AM: Reposition the unit until the best
reception is obtained.
- Slide FUNCTION SELECTOR to "RADIO"
position.
- Increase Volume.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and
Retest.
- Wipe CD with clean cloth or use another
disc.
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to clean.
- Relocate the player away from shock or
vibration.
- Adjust Volume Control to a lower
comfortable level.
- Check that Alarm indicator "
the Display.
- Make sure AM or PM is set correctly.
E-14
Solution
֠
" appears in

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents