4.2 Supervisor Menu
The Supervisor Menu is generated by a powerful utility, which offers an interface for
engineers (programmers or system integrator) to view system information, change the
congiguration parameter, download programs and run diagnotics.
This memu is designed for engineering tests and maintenance ONLY. For this reason, the
Supervisor Menu provides password protection to prevent unauthorized users from
accidentantlly changing system settings.
How to access the Supervisor Menu?
1. Turn off the PA-20 terminal.
2. Press [1] + [3] + [0] + [Power]
Note:
The Supervisor Menu is NOT for the use of any end users. The system
password helps ensure system safety and integrity.
Communication
4.2.1
File Transfer
Upgrade
Interface
Baud Rate
Format Disk
4.2.2
Format C
Format D
Setting
4.2.3
You can change the default setting here.
System Setting
Equipment ID
Password
BIOS default
Barcode
4.2.4
Reading Test
Indication
System Setting
LED
Beep
Default Values
0000
00000
Default Values
Enable
Enable
25