Test; Information - Argox PA-20 Manual

4.1.4

Test

Test > Memory Test
Test the data memory (DDRRAM), and the results will be shown on the screen. To stop and
exit the test, press [ESC]
 The data saved on C:\ maybe lose after the memory test.
Notes:
Test > Buzzer Test
Test the buzzer with different frequency / duration combination. Press [ENT] to start. To stop
and exit the test, press any key.
Test > LCD & LED Test
Test the LCD display and LED indicator. Press [ENT] to start. To stop and exit the test, press
any key.
Test > keypad Test
Test the rubber keys. Press any key and its corresponding character will be shown on the
screen. To stop and exit the test, press [ESC].
Test > Com Port Test
After a Com Port cable is connected properly, run "Hyper Terminal " on your computer and
start this test on your terminal.
Test > Read Test
Test the reading performance of the scanner. Press [SCAN] to start. To stop and exit the test,
press any key.
4.1.5

Information

Here provides important system information to help diagnose the system.
IPL
BOOT
Kernel
Scanner
SN
DefLang
IPL Version
BOOT Version
Kernel version
Scanner version
A serial number assigned to the terminal
Default language
24