Installing In A System - Argox PA-20 Manual

2.5 Installing in a System

 Exercise caution at all times when working with AC-powered equipment.
Notes:
 Turn off your devices before installation.
 Because of the special pin-out of the connectors, use the cables supplied by
the manufacturer.
 Do not modify the cable provided by the manufacturer. If you need a special
cable for some cases, contact your supplier to purchase the right cables or
technical support.
System Connection (Data Communication)
The PA series portable data terminals let you link to a host terminal through the CRD-22
cradle for data communication.
The CRD-22 cradle provides two methods for data transmission: through an RS-232 cable (9-
pin connector for PC and 9-pin connector for terminal) and through a USB cable.
Figure 2-9 System Connection
 When both RS-232 and USB cables are connected between the CRD-22
Notes:
cradle and host terminal, PA-20 can assign either USB or RS-232 interface for
data transmission.
16