2. Turn the selection dial until "Set temperature" is displa-
yed;
3. Press the
button.
4. Turn the selection dial until the desired temperature
(l=low; llll =high) is shown on the display.
5. Press
to confirm.
The temperature has been reprogrammed: press
the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
Enable/disable the beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or re-enable the beep, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until "Beep" is displayed;
3. Press
: "Enable?" or "Disable?" is displayed;
4. Press the
button to enable or disable the beep;
5. When the function is enabled an asterisk appears under
"Beep" in the menu.
Then press
to exit the menu.
Setting the language
To modify the language on the display, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until "Set language" is displayed;
3. Press
;
4. Turn the selection dial until the desired language is di-
splayed;
5. Press
to confirm;
6. A message confirming the language installed is displa-
yed;
7. Then press the
button to exit the menu.
Cup lighting
This function enables or disables the cup lighting. When the
function is active, the lighting comes on whenever cappuccino
or milk based drinks are made or the appliance is rinsed.
To disable or re-enable this function, proceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until "Cup lighting" is displayed.
3. Press
: "Enable?" or "Disable?" is displayed;
4. Press the
button to enable or disable the cup lighting;
5. When the function is active, an asterisk appears under
"Cup lighting" in the menu.
Then press
to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language
which remains as set).
1. Press the MENU button to enter the menu;
2. Turn the selection dial until "Default values" is displayed;
3. Press
to exit
4. Confirm?" is displayed.
5. Press
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU button to enter the menu;
2. Turn the selection dial until "Statistics" is displayed;
3. Press the
4. Turn the selection dial to verify:
-
how many coffees have been made;
-
how many drinks have been made using milk;
-
the total number of litres of water delivered;
-
how many times the machine has been descaled.
-
how many times the water softener filter has been repla-
ced.
5. Press the
MAKING COFFEE
Selecting the coffee flavour
The appliance is set by default to make coffee with a standard
flavour.
You can also choose one of these flavours:
Extra-mild
Mild
Standard
Strong
Extra-strong
To change the taste, press the
until the required taste is displayed.
Selecting the quantity of coffee in the cup
To select the quantity of coffee, turn the selection dial (fig. 8)
until the message corresponding to the required quantity of
coffee is displayed:
11
;
to confirm and exit.
button.
button twice to exit the menu.
dial (fig. 7) repeatedly