Motorola CPEi 750 Series User Manual page 21

3
Ring Tone Tab
The Ring Tone tab allows you to customize ring tones for your telephone(s).
Table 3-9 Ring Tone Tab
Be sure to click the Apply button once you have made changes.
Caller ID Tab
The Caller ID tab allows you to manage the Caller ID functions for your telephones:
Table 3-10 Caller ID Tab
3-8
NOTE
You need a phone connected to your CPE to hear ring tones.
Field or Button
Default Line 1 Ring Type
Test
Default Line 2 Ring Type
Test
Field or Button
Enable Line 1 Anonymous Incoming Call
Rejection
Enable Line 1 Permanent Anonymous
Outgoing Call
Enable Line 2 Anonymous Incoming Call
Rejection
Basic Configuration
Description
Use the drop-down box to select a ring
tone for Line 1. The default is ringtone R0.
Click to hear how the selected ring tone
sounds.
Use the drop-down box to select a ring
tone for Line 2. The default is ringtone R0.
Click to hear how the selected ring tone
sounds.
Description
If Line 1 is your active telephone port,
check this box if you would like to reject
telephone calls from anonymous incoming
callers. The default is checked.
If Line 1 is your active telephone port,
check this box if you would like to
permanently block your telephone number
from appearing on others' Caller ID. The
default is unchecked.
If Line 2 is your active telephone port,
check this box if you would like to reject
telephone calls from anonymous incoming
callers. The default is checked.
68P09292A81-B
JUN 2008