Ventilation Requirements - Baumatic B602.1BL/W User Manual

Ventilation requirements

o You should remove the rear panel of the housing unit before
o A minimum ventilation gap of 90 mm must be allowed between
o A 400 cm² (20 x 20 cm) ventilation cut out must be made in the
o A minimum ventilation area of 80 cm² must be allowed below
o If the appliance is to be installed in a Leisure Accommodation
Downloaded from www.Manualslib.com
attempting to install the oven. A full depth shelf must be
incorporated into the housing and positioned 50 mm below the
support shelf for the appliance.
the rear of the support shelf and the rear of the housing unit.
support shelf.
the appliance.
Vehicle, the requirements of EN 721 must be applied.
manuals search engine
25