Positioning - Baumatic B602.1BL/W User Manual

o To connect the oven power cord, loosen and remove the cover
o If you have to change the oven power cord, the earthing
o Care must be taken to ensure that the temperature of the mains
o If the mains supply cable is damaged, then it must be replaced

Positioning

o Your appliance is heavy, so you should be careful when moving
o Do not try to move the cooker by pulling on either the door,
o The oven may be located in a kitchen, or a bedroom, but not in a
o LPG models must not be installed in a room or internal space
o This oven may be used for a built-in or built under installation
Downloaded from www.Manualslib.com
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
supply cable does not exceed 50°C.
by an appropriate replacement.
The adjacent furniture and all materials used in the
installation must be able to withstand a minimum
temperature of 85°C above the ambient
temperature of the room it is located in, whilst the
appliance is in use.
or positioning it.
handle or control panel.
room containing a bath or shower. The oven must not be
installed in a bedroom of less than 20m³ in size.
below ground level (e.g. in a basement).
(see the diagrams on pages 25 - 26).
manuals search engine
23