Table of Contents
Advertisement
From the Standby screen, press and release *until ALARMS? displays. Press
+ to enter the ALARMS menu. Press **+ to enter EVENT alarm mode.
• Press * to choose EVENT alarm 01, 02 or 03.
01//
H I
• Press +, then press * until . , (the enable
AAAAAAAAAAAAAA
alarm icon) displays. Press + to move to the
next field.
• Press * until J (the enable alert icon) displays
03 . ,
H I
and press + to move to the Message field.
AAAAAAAAAAAAAA
• Press * to scroll through the characters
03 . ,
H J
available, then press + to move to the next.
AAAAAAAAAAAAAA
Note: You can enter up to 14 characters
(letters, numbers or spaces). If the message
is less than 14 characters long, advance to
the rubout character (®) and press + to fill
the remaining character fields with blanks.
• At the last character field, press + to move to
03 . ,
H J
the alarm Time-Date screen.
P I C K U P W E N D Y
• If the EVENT alarm is not stopped during
H J
activation, the ALARM icon flashes.
9:00
A
9/29
• Press any button once to read the message,
and press again to clear.
Note: You can temporarily turn off a daily alert (for example, on a weekend).
To turn off the alert, follow these steps.
1. From the Standby screen, press and release * until ALARMS? displays. Press
+ to enter the ALARMS menu. Press **+ to enter EVENT alarms
mode.
2. Press * until the EVENT alert you want to turn off displays. Press + + to
move to the alert enable/disable field.
3. Press * until I (the disable alert icon) displays.
4. Press ) to set and exit. The alarm remains set and turned on, but the alert
won't occur until it is turned on again.
03 . ,
9:00
A
9:05
P
P I C K U P W E N D Y
20
19
To turn the alert on again, follow these steps.
1. From the Standby screen, press and release * until ALARMS? displays. Press
+ to enter the ALARMS menu. Press **+ to enter EVENT alarms
mode.
2. Press * until the EVENT alert you want to turn on displays.
3. Press + + to move to the alert enable/disable field.
4. Press * until J (the enable alert icon) displays.
5. Press ) to set and exit.
To turn off (erase) the alarm settings, follow these steps.
1. From the Standby screen, press and release *until ALARMS? displays. Press
+ to enter the ALARMS menu. Press **+ to enter EVENT alarms
mode.
2. Press * until the EVENT alarm you want to turn off displays. Press +, then
press * until -- (the disable alarm icon) displays.
3. Press ) to set and exit.
21
22
• Press * to set the hour to the desired value.
H J
• Move to the Minute, AM/PM, Day and Month
9/29
fields by pressing +, then press * to set the
value for each field.
• Press ) in any field to set and exit.
Note: You can only set one EVENT alarm at
a time. You must press ) to save each
event alarm prior to setting the next alarm.
Note: To alert on a daily basis set the Day
and Month to --/--.
• The Standby screen displays with J (the enable
H J
alert icon).
9/28
• When an EVENT alarm expires, the message
H J
displays and the pager alerts. Press any button
once to stop the alarm, and again to clear the
message.
Advertisement
Table of Contents
