Turning The Pager On/Off; Sending A Test Page To Yourself; Backlight - Motorola TalkAbout T340 User Manual

World message pager
Table of Contents

Advertisement

Controls
1
Stop by the club
Mode
Button
*
The Mode button can be pressed repeatedly (or pressed and held) to scroll
through available choices and to increment a value.
+
The Select button is used to select and confirm a value.
) The Read/Power On button is used to read a message, to save a setting, to
turn on the pager, or to turn on the backlighting.
To Turn Off
From the Standby screen, press and release * until CONTROLS? displays.

Press + to enter the CONTROLS menu.
• Press + to set the pager to OFF mode.

H
OFF?
d
• The OFF screen displays without any alert icon.

12:00 A
1/01

Sending a Test Page to Yourself

It's a good idea to test your pager and service by sending a page to yourself. Start
by using the phone number, web site or email address (and PIN, if required) your
service provider gave you, then enter a short message.
If you are sending a word message from a phone, an operator will assist you;
otherwise press the phone buttons to enter a numeric message or type a
message and send it.
Read/
Power On
Button
H
Q
Select Button
3
5

Turning the Pager On/Off

To Turn On
• From the OFF mode, press ).

12:00 A
1/01
• This Startup screen displays momentarily and the

H
pager either alerts audibly or vibrates.
MOTOROLA
Note: The Startup alert can be skipped by
pressing ).

• The Standby screen displays the time, date and
H
the AUDIBLE alert iconH(or VIBRATE alert
12:00 A
1/01
iconG).
4
While you are waiting for the message to reach your pager, refer to page 9 for
more information about how to read a message.
If your pager does not receive the message within a few minutes, contact your
service provider. After you've tested your pager, read the rest of this guide to learn
about the many useful features of your new pager.

Backlight

Press and hold ) for one second or more to activate the LCD screen backlight.
When you have finished reading your messages and the Standby screen is
displayed, the backlight remains on for four seconds before automatically turning
off.
6

Advertisement

Table of Contents
loading

Table of Contents