Motorola TalkAbout T340 User Manual page 4

 • The last screen displays the time and date the
4 H
message was received. After an interval, the
3:51P 9/29
pager returns to the standby screen.
Note: If a message is unread and audible alerts are chosen, the pager gives a
periodic alert until all unread messages are read. This alert will continue for up
to 30 minutes. A message is considered read if any part of the message is
displayed.
Duplicate Messages
• If a duplicate personal message is received, the


4 H ¶
Duplicate icon ¶ displays on top.
§ § § $
• Press ) to view the duplicate message.
• The word DUPLICATE displays before the duplicate

4 H ¶ Q
message is displayed.
DUPLICATE 1
Choosing a Pleasing Alert
If you select the AUDIBLE alert mode, you can choose the standard alert, NO
ALERT, or one of eight PLEASING alerts.
From the Standby screen, press and release *until ALERTS? displays. Press


+ to enter the ALERTS menu.
• Press *+ to enter the PLEASING alert

H
menu.
j
PLEASING?
• Press * until the desired alert mode displays

H
(e.g. ARPEGGIO).
ARPEGGIO?
T
• The pager gives off a sample of each displayed
alert. Press ) to set and exit.
• The Standby screen displays with the Audible

H
alert icon H.
9:05 P 9/28
Note: If you choose NO ALERT or VIBRATE, the pager gives off an audible alert
only if a priority alert is received. To stop an alert, press any button.
Choosing the Alert Mode
You can choose one of four alert modes: AUDIBLE, VIBRATE, CHIRP, or
ESCALERT.
Note: In ESCALERT mode, the alert grows increasingly louder. In AUDIBLE
mode you can set a PLEASING alert or NO ALERT.
From the Standby screen, press and release *until ALERTS? displays. Press


+ to enter the ALERTS menu. Press + again to enter the ALERT MODE
menu.

AUDIBLE?

VIBRATE?

9:05 P
12
11
Setting Alarms
There are three types of alarms: REMINDER, GENERAL and EVENT. If the pager
is in OFF mode when an alarm expires, it turns on, alerts according to the alert
mode, and remains on. If the pager is in NO ALERT mode, an alarm causes an
audible alert.
REMINDER Alarm
A single REMINDER alarm can be set to expire within 60 minutes or less.
From the Standby screen, press and release * until ALARMS? displays. Press


+ to enter the ALARMS menu. Press + again to enter the REMINDER
menu.

REMIND OFF

REMIND 45 MIN
13 14
• Press * until the desired alert mode displays
H
(e.g. VIBRATE).
w
• The pager gives off a sample of each displayed
G
alert.
x
• Press ) to set and exit.
• The Standby screen displays with either H (the
G
audible alert icon) or G (the vibrate alert icon),
9/28
depending on which alert mode was chosen.
• Press * to set the alert time. In this example,
H I
the pager is set to alert 45 minutes from the time
the alarm is set.
Note: When setting the alert time, the value
starts with OFF, then 1 through 60, then OFF
again.
• Press ) to set and exit.
H J