Setting Mode - ELNA Lotus Instruction Manual

Setting Mode

To enter the setting mode, press and hold the thread
cutter button and turn the power switch on until the
setting mode screen appears. The LCD display will show
"01", "on" and "oF", and the "on" mark will blink.
In this mode you can set the following machine functions.
• Buzzer sound setting
The buzzer sound can be turned on or off using the
buzzer sound setting.
Enter the setting mode.
The default buzzer sound setting is "ON".
To turn the buzzer sound off, press the stitch length
adjusting button "
To turn the buzzer sound on, press the stitch width
adjusting button "
Press the auto-lock button to apply the buzzer sound
setting.
* Caution buzzer sound cannot be turned off.
• Needle stop position setting
You can set the needle position to up or down when
the machine stops.
Enter the setting mode. Press the thread cutter button
to enter the up/down needle position setting.
The default up/down needle position setting is "dn"
(down).
To change the needle position to up, press the stitch
width adjusting button "
blink.
To change the needle position to down, press the
stitch length button "
Press the auto-lock button to apply the needle stop
position setting.
20
", and the "oF" mark will blink.
", and the "on" mark will blink.
" and the "UP" mark will
" and the "dn" mark will blink.