Section Ii. Getting Ready To Sew Connecting The Power Supply; Before Using Your Sewing Machine; Operating Instructions - ELNA Lotus Instruction Manual

q
t
q
e

Operating Instructions:

The symbol "O" on a switch indicates the "off" position
of a switch.
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way (U.S.A. and Canada only).
* Foot control model 21371 is used with this sewing
machine.
e
w
r
y
i
w
r
SECTION II. GETTING READY TO SEW
Connecting the Power Supply
• Using the foot control
Turn off the power switch q.
Pull the foot control cord from the foot control.
Insert the foot control plug w into the foot control jack e.
Insert the machine plug r into the machine inlet t.
Insert the power supply plug y into the wall outlet u.
Turn on the power switch q.
The foot control sign i will be displayed when the foot
control is connected to the machine.
q Power switch
w Foot control plug
e Foot control jack
r Machine plug
t Machine inlet
u
y Power supply plug
u Wall outlet
i Foot control sign
NOTE:
Do not pull the cord of foot control beyond the red
marker on the cord.
• Using the start/stop button
Turn off the power switch q.
Insert the machine plug w into the machine inlet e.
Insert the power supply plug r into the wall outlet t.
Turn on the power switch q.
q Power switch
w Machine plug
e Machine inlet
r Power supply plug
t Wall outlet
NOTES:
• The machine will be initialized when turning on the
power switch. Do not touch the machine while the
machine is being initialized.
• The start/stop button does not work when the foot
control is connected.
t
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
Always turn off the power switch and unplug from
the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.

Before Using Your Sewing Machine

Before using your sewing machine for the first time,
place a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.
6