Problems And Warning Signs - ELNA Lotus Instruction Manual

Problems and Warning Signs

Warning sign
Audible signal The buzzer sounds when:
Pip
Pip-pip-pip
Pip-pip-peep
Peep
The machine will not sew with the start/stop
button because the foot control is connected.
A buttonhole is sewn without lowering the
buttonhole lever.
The bobbin winder spindle is moved to the right.
The machine is restarted too soon after it has
halted due to the overload.
Auto thread cutting error due to a problem in
the electronic components or tangled in hook
area.
Normal operation
Invalid operation
Buttonhole sewing completed
Malfunction
Cause
43
Try this
Disconnect the foot control
and start the machine.
Lower the buttonhole lever
and restart the machine.
Move the bobbin winder
spindle to the left.
Wait for at least 15 seconds
to restart. If threads are
jamming, remove the
jammed threads.
Remove the jammed
threads in the hook area.
If the error occurs again
after cleaning the hook
area, contact the service
center or the store from
where the machine was
purchased.