ELNA Lotus Instruction Manual page 16

z
q
w
x
e
c
v
r
b
y
• Inserting the bobbin
z Place a bobbin in the bobbin holder w with the
thread running off counterclockwise.
q End of thread
w Bobbin holder
x Guide the thread into the first notch e on the front
side of the bobbin holder.
e Notch
c Draw the thread to the left, sliding it between the
tension spring blades.
v Continue to draw the thread lightly until the thread
slips into the second notch r. Pull out about 4˝ (10
cm) of thread.
r Notch
b Attach the hook cover plate. Check the threading
by referring to the diagram t shown on the hook
cover plate.
t Threading diagram
y End of thread
t
14