The Infrared Port - Motorola Page Writer 2000X User Manual

A flashing red LED indicator means the battery is not
making a good contact. Ensure the pager is properly
seated in the charger.
6. When the green LED indicator lights, the battery is fully
charged. Slide the pager forward to release it from the
charger.
7. Remove the round transformer connector from the back of
the charger, then remove the plug from the power supply.

The Infrared Port

The PageWriter 2000X includes an infrared (IR) port in the
charger housing. This device is used as a docking station for
your pager when transferring data to and from your computer.
The IR port in the docking station aligns with the IR port on
your PageWriter 2000X smart pager, enabling data
transmission. The docking station is connected to your
computer with the Motorola-provided RS232 null modem
cable.
When a data transfer is in process between the PageWriter
2000X and a PC, the green and red LED indicator lights will
flash intermittently.
To connect the docking station to your computer:
1. Connect one end of the RS232 cable to your computer's
nine-pin serial port.
2. Connect the other end of the RS232 cable to the nine-pin
connector in the back of the docking station.
TM
16 PageWriter 2000X User's Manual