Navigation; Help, Restart, And Logout - Motorola WA840G User Manual

SECTION 3
3-2
2 Enter the User ID. The default factory setting is admin.
3 Enter the Password. The default factory setting is motorola.
After you have logged in, for security reasons you should change
the User ID and Password. See below.
4 Click Log In to enter the access point's Configuration Utility.

Navigation

Each of the following subsections describe the components of the
access point's Configuration Utility, which is accessible from a web
browser. These sections include:
To navigate, click on a major section and then the associated
subsection. For example, to adjust the User Login ID, click
CONTROL PANEL on the left, then DEVICE SECURITY tab at top
on the right. The Web-based Configuration Utility uses Javascript.
Your web browser's Javascript needs to be enabled.

Help, Restart, and Logout

Click on the appropriate command to execute the action.
Help Accesses Help.
Restart Restarts your session with the Configuration Utility. When
Restart flashes, the change you have made requires that
you restart the unit.
For convenience, it is recommended that you finish
all of your configuration changes and then restart the
unit.
Logout Logs out of the access point's Configuration Utility.
CONFIGURATION
WA840G