Lenovo ThinkPad P70 User Manual page 94

Hide thumbs Also See for ThinkPad P70:
Table of Contents

Advertisement

Table 3. Security menu items (continued)
Menu item
Submenu item
Memory Card Slot
Smart Card Slot
Integrated Camera
Microphone
Fingerprint Reader
Thunderbolt
ExpressCard Slot
USB Type_C
Internal Device
Bottom Cover
Access
Tamper Detection
Anti-Theft
Computrace Module
Activation
Secure Boot
Secure Boot
Platform Mode
Secure Boot Mode
Reset to Setup Mode
78
ThinkPad P70 User Guide
Value
Comments
• Disabled
If you select Enabled, you can use the
memory slots.
• Enabled
• Disabled
If you select Enabled, you can use the
smart-card slot.
• Enabled
• Disabled
If you select Enabled, you can use the
integrated camera.
• Enabled
• Disabled
If you select Enabled, you can use the
microphones (internal, external, or line-in).
• Enabled
• Disabled
If you select Enabled, you can use the
fingerprint reader.
• Enabled
• Disabled
If you select Enabled, you can use the
Thunderbolt 3 connector.
• Enabled
• Disabled
If you select Enabled, you can use the
ExpressCard slot.
• Enabled
• Disabled
If you select Enabled, you can use the USB
Type_C feature.
• Enabled
• Disabled
Enable or disable the tamper detection. If
tamper is detected, Supervisor Password is
• Enabled
required to boot the system. Bottom Cover
Tamper Detection will not take effect unless
Supervisor Password is enabled.
• Disabled
Enable or disable the UEFI BIOS interface to
activate the computrace module. Computrace
• Enabled
is an optional monitoring service from
• Permanently
Absolute Software.
Disabled
Note: If you set the computrace module
activation to Permanently Disabled, you will
be unable to enable this setting again.
• Disabled
Enable or disable the UEFI Secure
Boot feature. Select Enable to prevent
• Enabled
unauthorized operating systems from running
at boot time. Select Disabled to allow any
operating systems to run at boot time.
• Setup Mode
Specify the system operating mode.
• User Mode
• Standard Mode
Specify the Secure Boot mode.
• Custom Mode
This option is used to clear the current
platform key and put the system into Setup
Mode. You can install your own platform key
and customize the Secure Boot signature
databases in Setup Mode.
Secure Boot mode will be set to Custom
Mode.

Advertisement

Table of Contents
loading

Table of Contents