Lenovo ThinkPad P70 User Manual page 140

• Do not touch the connector.
• Before removing the M.2 solid-state drive, make a backup copy of all the information on it, and then
turn off the computer.
• Never remove the M.2 solid-state drive while the computer is operating, in sleep mode, or in hibernation
mode.
To replace the M.2 solid-state drive, do the following:
1. Disconnect the ac power from the computer and turn off the computer. Close the computer display
and turn the computer over.
2. Remove the removable battery. See "Replacing the removable battery" on page 115.
3. Remove the bottom cover. See "Replacing the bottom cover" on page 118.
4. Remove the screw that secures the M.2 solid-state drive.
Note: A Mylar film might cover the solid-state drive. To access the solid-state drive, open the film first.
5. Carefully remove the M.2 solid-state drive out of the slot.
124
ThinkPad P70 User Guide